Green Umbrella GreenCut™

Green Umbrella GreenCut™

The Green Umbrella GreenCut™ is an environmentally friendly cutting and slurry agent for treating concrete floors. As part of the GreenCut™  System it cuts the concrete using molecular cutting agents, reducing the number of diamond steps and creating a less porous floor than could previously be achieved. The Green Umbrella GreenCut™ agent starts out by penetrating the concrete allowing for easier and faster processing. The frothy slurry created by the process is ground into the floor to help seal pores, producing a denser surface.

GreenCut™ floors respond differently to color introduction yet they can be colored to allow for endless design possibilities. The Green Umbrella GreenCut™ cuts labor requirements and greatly reduces wear on your metal bond diamond abrasives saving you money. The Green Umbrella GreenCut™ Process uses as few as 2 diamond grit steps to grind, hone and polish concrete floors. The Green Umbrella GreenCut™ System creates a more resilient floor with a superior gloss while saving time, money and eliminating hazardous waste disposal issues—significantly reducing your company’s impact on the environment.

Green Umbrella GreenCut™ is specially formulated for use in manufacturing & light assembly plants, warehouse/distribution centers, food service operations, retail stores & showrooms, garages, airports, hospitals and any other areas where polished concrete surfaces are maintained.

SAFER FOR THE ENVIRONMENT
The Green Umbrella GreenCut™ is a responsible alternative for professionals concerned about the environmental impact of the concrete polishing process. The Green Umbrella Green Cut uses a wet process preventing dust from contaminating the air and HVAC system, thereby alleviating concerns regarding indoor ambient air quality. The process diminishes the amount of time and energy spent on a project meaning fewer carbon emissions. Green Cut will not contribute to Alkali-Silica Reaction (ASR). The reduced porosity and harder surface will allow floors to wear longer, stain less and require less frequent maintenance.

SUPERIOR FEATURES

  • Reduces the number of diamond grinding steps
  • Cutting agent
  • Slurry agent
  • Creates a less porous surface
  • Improved productivity
  • Metal bond diamond abrasives last significantly longer
  • Super high gloss if desired
  • be colored using a dye or micro-pigment

EASY TO APPLY – QUICK TO CURE – SIMPLE TO MAINTAIN
Apply Green Umbrella Green Cut to a floor that has been saturated with water for at least 30 minutes. Spray green cut using a tip for approximately 500 sq. ft. of coverage per gallon. Allow to set for at least 20 minutes before grinding the floor. Green Umbrella Green Cut floors are less porous and are easily maintained by auto-scrubbing or damp mopping.

Downloads